Na Dobre I Na Złe Odcinki On Line

How to make a soundtrack?

Quite a lot of our time musicians who would like to play the sound recording is almost indistinguishable from the original sound, without a single guitar and vocal and would not know the program Guitar Pro. But not everyone knows how to do a soundtrack, not thinks, or thinks that it is very difficult and laborious work that is not on the hands. Midi sound, or even the same in the RSE Guitar Pro begins to cut the ears and annoying. And even virtual keyboards can not replace the present drum, guitar sound. And comes the idea of \u200b\u200bdoing a little bit like a soundtrack. Professionally, I was not engaged, today I want to tell a simple way to create backing tracks.

Well, let's go?

In the most important part I take a midi file, without it we do nothing, and therefore it is the root and the beginning of everything that grows from it later. My scheme is such that it is Guitar Pro - FL Studio - VST - Cubase SX or Adobe Audition - mixing and withdrawal of their owners. For all this, we need some programs and VST (i) plug-ins.

Downloads You tablature of your favorite band, Guitar Pro to play it. Hence the beginning. Suppose we have a song (tablature), which we have to import a midi.

In Guitar Pro look to the left which tools are present in the song .. In this case, we do not need vocals, so you need to press the M (Mute), to turn off the track. After that we derive from our "tabs" midi-file. Go File> Export> Midi and set the folder save midi tracks.

Next indispensable for all and a very well-known program that we will need this FL Studio. In it we will do everything.

Open FL Studio File> Import> Midi File select our saved midi file. Open window with the correct choice of track.

Select exactly the one we are now going to do.

After the opening we have the necessary window. Topmost window - sequencer, which displays the entire length of the track, allows you to adjust balance and volume, and a lot more what. Square below the window - the usual, the easiest midi synthesizer. The right window - Piano Roll, shows us the path to the notes, with the ability to edit it.

Now we have a track synthesizer that reproduces the usual midi player, but we need this synthesizer is replaced by a more approximate to the real. Generally synths in FL Studio I prefer the longer ones in the picture above (String patch1, 2,3). To select them and apply to this path must be on the right side in the effects of find the section Packs, then the Legacy and Strings in a folder, we will have all the effects of this category. When you click one of them we hear the sound sample. After picking up the appropriate effect, simply drag it into the sequencer.

After that, we have our track takes on an entirely different sound. When you click the Play button can listen. If you do not like us to sound the same can easily select and drag String patch 2 and any other effect.

now talk about another the way, if you need a different effect. Most importantly we have a window - Piano Roll, with it going a little manipulating. Go to the Channels> Connect VST> and select the synthesizer Sytrus.

opens with synth effects and buttons at the bottom. The right can see the controls that help is very flexible to customize each effect.

In this case, as soon as we open this synthesizer, we have opened a new channel in the Piano Roll with this effect.

Now how to remove us to the first effect String patch 1 and include the effect of Sytrus.
As we see in a sequencer, a second track Sytrus, which is empty:

To remove the first channel and include only Sytrus go into the Piano Roll, choose a channel String patch1, then all known Ctrl + A to select all (select all sticks, notes that there are registered) and cut Ctrl + X.

Then go to channel Sytrus, Ctrl + V paste our track. All that now it plays Sytrus. Of course if the channel String patch 1, we do not cut our path, then the game would be a combination of two keyboards.

now about how we needed to switch instruments / effects in Sytrus. I think the picture below all clear. Click on the button at the top of the extreme left and select Presets and then will be a huge box asking for your effects.

Now let's talk about how to make drums.

To do this we need a VST plugin.
Virtual Studio Technology (VST) - format resource-dependent (native) plug-ins real-time, non-plug-ins to audio editors and music editors, sequencers, etc., developed by Propellerhead and subsequently transmitted by Steinberg. At the present time in this format, there are hundreds of plugins, it has become one of the most common formats for audio programs.

For drums I use a plugin XLN Audio Addictive Drums, which can be downloaded at any tracker. It weighs about 4 GB. Setting it on a computer we will need to add it to the FL Studio. Click Channels> Connect VST> \u0026lt;More. Will be a long window with all the VST plug-ins that you might have, click scan, and where Addictive Drums left to put F (plugin).

Then close the window, the plugin is already with us.

Now, again, our import midi file as above, select a track drums.
In the Piano Roll once can select all and cut (Ctrl + A & Ctrl + X).

further as to the effect of Sytrus, go to the Channels> Connect "and select VST plug-in Addictive Drums, after it should boot successfully.

In Piano Rolls doing the same manipulations as before, again with the new channel appears Addictive Drums, and there we all stick notes Ctrl + V. Now we have a brand new real sound of drums.

Then go to File> Export> wawe file and export the drums of the required format and bitrate.
It should be noted that not always coincide with hetom drums or bass in a barrel plug, and can play in the spread. To do this, there is need for us to work hard at the hearing. Often always the bottom line is the bass a barrel, and if it is not the position on our site, simply take as the picture above holding down the Ctrl key and click on B2, then we will have selected only one red line (bass drum). Now do not be a problem all of her move to another key above or below under a certain part of her drum, whether it's Plate, a hat.

Basically I told the principle of establishing the party synth and drums. If for example will need a pipe, a suitable in FL Studio is not there, download the VST plug-in, install and do everything exactly the same.

now on the guitar.

Everything is done exactly the same with other plugins. Acoustic Guitar I use Real Guitar 2, it weighs little, up to 400Mbps, with a very high-quality acoustic sound.

When it opens at once to choose a guitar, such as Acoustic: Steel 2, or others on the list.

Distortion

For Distortion effect, I use Guitar Rig. After installing This program, VST plug-in immediately, you can add in FL Studio. But they should not enjoy as in previous examples. For him, we will use the mixer. Open it again in a midi guitar track. Now open the mixer.

Adding plugin Guitar Rig. Click on the Fruity LSD> Select> Send in a large the list of plugins at the top, click "More", choose from the list and activate the Guitar Rig.

In Guitar Rig choose the desired effect, and export to mp3. Of course best second, third, to record the guitar itself, but if a "broke", then ... With a bass guitar the same way, only in Guitar Rig choose bass amp. Or swing plugin bass guitar.

At the end we need to export all the tracks, put them in audioredakotor, for example Adobe Audition.

And there is already engaged in reducing all tracks, level control, etc., and then mixing all the tracks into one.

I do not know clearly explained everything or not, but just everything about it. Below 2 examples of phonograms made it such a simple way.

Example phonogram Kipelov and Mavrin - Castlevania (without a guitar)

Example phonogram Aria - Dead Zone (without a guitar)

Brownish Discharge And Smelly Urine

Skalopirovanie neck at Cort X-6

been dreaming about it, but after a time decided to implement their dreams into reality. Took his only guitar, and ...

How was it?

Sometime earlier I did not even know what it is and why it is necessary. So fond of his guitar and all ... It started when I started listening to a famous guitarist Sergei Mavrina. How then to one of the photos I saw him on the neck guitar cuts deep into between the frets, and began to wonder what it is and all for nothing. Read on the internet that it is called skalopirovaniem. When I began to get involved his technique of "touch-style" I became more and more interested in skalopirovanie neck. At first it was all a dream. I have a home studio, and nowhere there is not even, or especially details for this. Read about it on the internet, forums, and here I pereklinilo. Enough after reading pereklinilo me and I went to the market. This morning there were doubts do or not do this step, because it was the only guitar. In the market I bought a lot of nazhdachek different from the largest to the smallest. I came home and started See what is near at hand is suitable. I must say that this method is not correct, and professional workshops are doing it differently.

So let's start!

at hand at home I found a piece of wood long cylindrical shape with different diameters, which are both just remembered I had ordered from someone that I did who worked at the carpenter's shop. tape, scotch and file. That was all. Dereyannye bars cylindrical shape I needed for cuts between frets on them I pulled nazhdachku and began to "scratch". Rasteliv newspaper on the floor and putting the guitar, I have transgressed the last 24 frets, it seemed easier for me, a small distance in width, and if you do not like it then you will not see.

turned out pretty badly not only took on one fret about 20 minutes.

error that I made at first it unprotected frets. On file and nazhdachki they were rough tracks. To do this, I took a narrow tape, and for every mood pasting of 5-8 layers and top layer of electrical tape.

When two frets were protected, I was about to prorilu between them. First, most rough, then softer nazhdachkoy. Edge on the sides of frets I dopilival neatly file.

whole process work took me from dusk till the next evening, about night, with a sleepless night away from one another. Turning to the big frets became heavier, because a large space more complicated make smooth rounded pits.

most difficult were the last frets are large, the picture above. Even top lok prevented, which I feared scratch. There I have my wise. Around him wore a tin box.

After all, I still long to trim your semicircular notches. And then polished to smoothness. Scalp turned out I had a deep, even taking into account the height of 2.8mm frets that was open to anything. Now I would not do deep cuts that's for sure. After all the agony of grinding, frets very well wiped with a dry cloth, but still had to be lubricated. I've used lemon oil, it is sold at any pharmacy. Rosewood began to shine like new.

Here's what happened.

course of perfect flatness can be said. But the first experience in the home turned out. Implications Of course then there were not very good, sick all the arms, legs, neck, even a couple of days)).

Scalp What gives?

After a hard work done the first sensation It was very unusual. Because the "bottom" under the fingers did not feel alone and presses the strings. Skalopirovanie gives you more to feel the guitar, good feeling, and to lift it becomes much easier to do. At first, the habit if the string is strongly pressed inside the guitar will seem upset but after an hour you get used to the game as his body parts). At the expense of sound before and after Scalpay can not say anything, 2 years ago I had not thought about it. But now I'm not a drop I do not regret that he had done Scalp in his guitar on a conventional guitar playing is not so interesting. It should also be noted that the brightest representatives skalopirovanogo neck were the guitarists like Malmsteen, Blackmore, etc.

Photograph Collection:

 

 

 

 

 

 

Do Women Love To Sit On Man Chest

Cort X-6 (review)

In this article I will share my impressions of this tool, its advantages and disadvantages.
speech today will focus on musical instrument Cort X-6, namely Guitar for Beginners musicians who want to purchase a tool designed for yourself the quality and inexpensive price. Certainly in our time, and such toys may seem a little expensive thing, because the $ 250-300 on the road does not lie.

As was?

My first el.gitaroy was Phil Pro, I bought it back in the very first endeavor and knowledge of music, but soon after a year and a half wanted something more, and "to seriously". About this company I did not even know, and when choosing a future instrument looked all at the same Phil Pro, only the level of expensive. And finally, when lumped money, my patience came to an end ... On the internet I saw all the guitars in that price category, which was available to me, and looked primarily through the eyes to look at. Cort X-6 was exactly what I imagined. On view was very impressed, and from reviews, too. Immediately switch to it. Ordering a guitar, weeks of waiting for me was severe punishment and long sleepless nights and thought in my head did not let rest. And then came the moment of perfect joy, I went for my "Lialechka.

opening the box I saw her wrapped in a white package looks fantastic. The set was a wire and keys, the instructions as I was expecting was not there. Then I did not know what the Floyd Rose, as his tune, and so, he drew me only my view. As I came home, the guitar was set up, but later start time upset. Inexperience, no educational program, and I tried to set it up, but the operation went anyway. There was even a moment, and I began to think that I came across some defective fake:). Some time later, the problem is resolved.
Now get to the point and the main characteristics ...

-With regard to the sound, here he was very pleased. Go tell that there is no soft "glass" like a stratum of sound you hear, then you have to G Series . In my opinion this guitar for heavier styles, ranging from hard-n-heavy ... He has three sensors, 2 humbucker and 1 single. Sensors are quite good, as one or the other. Of course in future upgrades can be easily replaced by better. With good new strings sound pretty decent, even the clean sound happy. Five-way switch and 2 knobs, tone and volume. Pen the way a very comfortable, and located in a good location, so that this inconvenience will not occur. In general, the money the sound is completely justified, and even better. 10 points I think that his 8-ku it deserves. Sustein course remains much to be desired.

- Mechanism. Here, it is also not quite bad, though certainly looking that. Floyd Rose for such a price was very high quality and good. As we know Floyd is better than keeping system tremolovskie system, but have low sustain. So that when properly Using a grinder, I had no need to set up the guitar at least 3.2 weeks of not introducing her out. Knives are erased as elsewhere, but not quickly. Rocking works very well, and I just do not mocked, in general, doing all that we can with it. Floyd is quite workable, but it is better not to overdo it. Tuners seemed too pretty quality, already after a lot of time and in perfect condition, chatter and the freewheel is not observed. Top Lock seems to me not very good. Of course for the price of something better and you can not say where the language is still turning. Metal is always soft, as in all the cheap guitars. String top keeps a well-lok, but with a strong tightening may even erupt thread or appear small notches in square metal pressing, which is pressed against the bolts. Paint eventually peel off in places where the key has often provarachivat. Quite frets are not bad, 2.9mm, not entirely erased quickly, but over time can be seen little, if you look closely at. With the lever of the problems there were not any, it is very convenient. Quality metal 5-6, the parameters of 7-8 points.

As for convenience, I think guitar is very comfortable in your hand and standing / sitting. Even if Floyd is very comfortable to play and the hand of a good falls, though all a matter of habit. Neck Bolt, with rosewood fingerboard, U-profile, has 24 frets, a very convenient access to all the frets. The strings are pressed not so easily as in the courts fenderovskogo Type G series, on this I have commissioned in Eb, but whatever the case, the standard was not gone anyway. Weight of the guitar the same way is not easy ... Ease - 8.

At the end of I want to say that the guitar in its price is not bad, and especially for the beginner. I have this guitar for 3 years, everything works perfectly, no matter what is not complaining. During this time, had do skalopirovanie her, and I do not regret, I will try in future to lay out the article. Among the few drawbacks is the quality of the metal. Price-quality 10 \\ 10.

design type Grif bolt (bolt-on)
Housing Lipa (basswood)
Neck Maple (maple), "U" profile, the width of the neck: 1F: 43mm / 22F: 56mm, thickness of the neck: 1F: 19mm / 12F: 21mm
Fingerboard Rosewood fingerboard (radius of lining 400mm)
Scale 25 1 / 2 "(648mm)
Frets 24 frets Jumbo (2.9mm)
Bridge Double locking-III
Inlay Position Markers frets
pickups Bluebucker BBHGB-BBMMSB-BBHGB (HSH)
Management 1 volume, 1 ton (c push-switch, pool), 5-way switch
Mechanics Black
Color BK (Black)
Complete guitar, keys
Production Indonesia